Original E-Steps




Distance between 120mm Mark and Extruder




New E-Steps Setting

- steps/mm

Instructions

  1. Load your filament.
  2. Measure 120mm from your extruder and mark the filament at that point.
  3. Command the printer to extrude 100mm of filament.
  4. Measure the distance between the first mark and the extruder.
  5. Enter your printer’s current extruder steps/mm.
  6. Enter the distance between the first mark and the extruder.
  7. Click calculate to get your calibrated E-steps.
  8. Change your printer to use the new calibrated E-step number!